Aero-Motive® Collector Ring
Aero-Motive® SR-series slip rings have copper-graphite brushes with braided-copper shunts and copper-alloy rings to provide maximum conductivity. Stainless-steel compression-brush springs provide constant, positive-brush contact. Brush holders feature phenolic, hinged, stainless-steel mounting clips for easy installation and proper alignment. Insulators are shock and moisture resistant with high dielectric strength and zinc-plated mounting studs for corrosion resistance
For weather-tight operation, the enclosed slip ring must be installed with the main shaft vertical and pointed down allowing the breather drain to function properly. A 25.4mm (1″) NPT female thread is provided in the main shaft for mounting on external equipment; however, fuse protection should be provided. Horizontal mounting is optional; in this case, the enclosed-slip ring will not be weather-tight.
Available in 11 or 12 wire/conductor configuration